Three-sided Bio Ethanol Built-in Fireplace 80 CM With Full Glass
Tax included. Shipping calculated at checkout
FREE SHIPPING IN THE NETHERLANDS - BELGIUM
Products can be delivered earlier, if not in stock.
We have more than 80 Bio Ethanol Fireplaces in the showroom.
Make an appointment and visit our showroom.
The corner bio fireplace is a combination of stainless steel, tempered glass and powder-coated steel. A model designed to be placed in a built-in space. The building can be made of plasterboard, preferably in a refractory version. The front frame is very small, only 14 mm wide, and subtly emphasizes the three-sided view of the fire. The bio fireplace is produced in Poland only for our store. The view of the fire on three sides, closed by tall glass in a small frame, is an undeniable advantage of a biofireplace.
The only corner model with full-height glass, fully protected against flames, which is important for small children.
Because the fireplace is covered with glass, the biofireplace does extract oxygen from the inside of the building, but no chimney installation is required. It can be installed in any room.
With the built-in installation above the bio-fireplace, it can be located just below the ceiling; a ventilation grille must be installed. On the other hand, at the top of the bio-fireplace, in the part that is built-in, there is a hole with a diameter of 100mm. A protruding wedge is screwed to this opening, to which a spiral tube can be attached so as not to lose heat and to guide it to the upper grille. However, for proper functioning of the bio-fireplace it is not necessary to physically connect the upper heat exhaust in the bio-fireplace to the ventilation grille, there is sufficient empty space in the building above the bio-fireplace.
Because the biofireplace does not emit any harmful substances, smoke or soot when burning, the ventilation grille only emits warm air.
There are oxygen supply holes at the bottom of the bio-fireplace, directly next to the burner. In the building, at the bottom, under the bio-fireplace, you can place a second ventilation grille, then the free air flow between them must be allowed into the building.
Bio fireplace with open sides; made of steel painted with heat-resistant paint in black, textured matt. In the upper part of the bio-fireplace there are special holes to press and secure the bio-fireplace in the building.
One burner with a width of 524 mm is used. The burner is made of brushed stainless steel, inside there is a ceramic absorbent insert (safe bio-insert), which protects against spilling the biofuel in the event of a hard impact or if the bio-fireplace falls over. At the same time, the biofuel burns more evenly. The burner has a biofuel indicator and safety ventilation holes. A burner with a capacity of approximately 0.75 liters, in which the biofuel will burn for up to 1.50 hours to 3 hours in real time. The set includes a special brush that effectively extinguishes the fire.
All three panes are tempered and transparent, their thickness is 4 mm. Both side windows can be opened (fixed with hinges), so access to the oven is from both sides.
Dimensions: height 500 mm, width 800 mm, depth 300 mm. Weight 28kg.
FREE SHIPPING: DELIVERY TIME 1 - 12 BUSINESS DAYS
WARRANTY: 3 YEARS
Choose options
SHOWROOM VIEWING - BY APPOINTMENT ONLY